|
 [ Feature and Instruction ] This product called "Gesso", in addition to fabrics, straw rattan weaving and leather materials, can be applied to hardwood, bamboo, stone, glass, ceramics, aluminum, iron, and plastic materials, it is suitable for all embryos that need to take care of priming, coloring and filling gaps. The ingredients are all environmentally friendly and non-toxic formulas. There was a big improvement on the formula of this product, therefore, it would be also good to use on soft or easily bending objects. The coating will not cause any crackle or flake off. Suggest using "400 fine abrasive sheet" to rub a bit (the result will be even better if collocate with polish set) for smooth surface effects when coating is dried. Do not get to close to the object or set the high-speed heating when use a hair dryer in order to avoid the crackle problem on the exterior and the uneven shrinking of the interior. Color masterbatch or water-based pigment can be added to adjust the color. The thick film would also come with the result as putty. It can save times on putty, primer coating, and color coating at bottom. The condition of precipitation is normal for this material. Please stir again before use. Please remember do not apply thick coating on object at once, or try to get the object dry in a short time period as it might cause the crackle problem. If waterproofing is not required, please choose "Primer Coating-White". [ Precautions ] 1. After applying this product and drying, it is recommended to use "400 fine abrasive sheet" to slightly polish it (it can be used with "Polish Set" for better results) to make the surface even and smooth; when using a hair dryer to speed up drying, do not be too close or the heat is too high to avoid cracks caused by uneven shrinkage speeds between the surface and the interior. 2. You can add "Color masterbatch" to adjust its color. When the film thickness is slightly thicker, it can also have the effect of filling soil, saving time for filling soil, applying primer, and applying bottom color paint. 3. This product will precipitate, please be sure to stir again before use, and remember not to apply too thickly at one time, or dry quickly, which will easily cause cracks. 4. Please do not add "Gorgeous luster or Glitter" into this product, because it is useless and has no effect at all. 5. If it is too thick, you can add a little water to make it thinner, which will make it easier to apply. |
|
[ Attention ] "Gel Glue-A Sustained Viscous" and "Gel Glue-B Interchangeable" are so called ˇ§Double Agent Découpage Processˇ¨ while use together. ˇ§Double Agent Découpage Processˇ¨ was developed by ˇ§MingAi Handiwork Association, Taiwanˇ¨ in 2008 and used in Découpage courses worldwide. We have the copyright on this process package. All rights are reserved by Taiwan MingAi. Various capacities ranging from 40g to 20kg are available, welcome to purchase. The production date is marked as "MM/DD/YY". |